1. Search
    Last Post
    Replies
    Views
  2. Gaétan, What are you using for recording...

    Gaétan,

    What are you using for recording software? There is usually a preferences/options where you setup the parameters for the interface, such as the number of input and output channels. The...
  3. If the mic still functions properly with phantom...

    If the mic still functions properly with phantom power (36 to 48 vdc) enabled, I would not worry about the LED not being lit.
    Unless the mic is still under warranty, the cost of a repair would...
  4. - Where are the levels on the VU meters compared...

    - Where are the levels on the VU meters compared to the other mixer?
    - Do you have headphones that you can compare volume levels of the two mixers?
    -Not sure which buttons you may be referring...
  5. By design phantom power only is present at the...

    By design phantom power only is present at the XLR connection when enabled. The 1/4" part of the jack will not have phantom power and this is the same on all interfaces which use a combo XLR / 1/4"...
  6. Hi Anoop, I looked at a couple places for the...

    Hi Anoop,

    I looked at a couple places for the ECM8000 specs. The Behringer spec sheet shows the sensitivity for the ECM8000 as 70dB. The site...
  7. VLP GTX owner here..... Checked in the menu...

    VLP GTX owner here.....
    Checked in the menu 'Setup' section of the GTX....
    Installed firmware version - 1.2.11 Build 61 (I believe it's the latest and likely the final)
    Date of manufacture - 2014...
  8. Hi Jaye, By this you mean you can record...

    Hi Jaye,


    By this you mean you can record your vocals OK and play them back through the speakers/monitors?


    - I'm assuming you are attempting to send the backing track music to the mixer via...
  9. 4 Weeks Ago
    2
    102

    I might be wrong, but I don't think there is a...

    I might be wrong, but I don't think there is a way to control the USB feed. I have a similar Behringer mixer and I can send the USB to the Main Outs or to the Phones/CTRL RM, but it does not give...
  10. 4 Weeks Ago
    2
    98

    I'm thinking a USB BT transmitter wouldn't work...

    I'm thinking a USB BT transmitter wouldn't work for a couple different reasons (usually need the host device to have a driver so it knows how to work with the BT device) and the ones I saw on Amazon...
  11. Yes, you can connect either. You would want a...

    Yes, you can connect either. You would want a cable like the one linked below in a length that best suits the distance you'll place one of the monitors from the 2i2. A cable is provided with the...
  12. You need to be particularly careful with ribbon...

    You need to be particularly careful with ribbon mics and inadvertent incorrect application of phantom power which could damage the ribbon element. You may already know this. I think the bigger...
  13. Hi Paolo, I looked at a few other vocal...

    Hi Paolo,

    I looked at a few other vocal effects products from TCH and as well from Boss. Of what I looked at none appear to implement any sort of EQing on vocals, bur rather use an effect which...
  14. I listened to the Youtube video. For the singing...

    I listened to the Youtube video. For the singing the Sennheiser and MP-75 were similar. For speaking at the end the MP-75 seemed more 'muffled' compared to the Sennheiser.

    Marty had mentioned...
  15. I have an MP-70. It's not a mic that works on my...

    I have an MP-70. It's not a mic that works on my voice very well, so it pretty much stays in a drawer. Not easy to pick a mic as everyone's voice is different and what sounds good for one person may...
  16. Dominique , You say you hear the 'sound' ...

    Dominique ,
    You say you hear the 'sound' clipping, but I'm not sure if you mentioned if the 'CLIP' light next to the gain control was illuminating to indicate clipping when doing loud strumming. If...
  17. Curious as to what microphone you might be using...

    Curious as to what microphone you might be using for vocals. It took me a while to find one that gave the vocal sound I wanted with a VLP GTX. I settled on a Miktek PM-9 as working best and a...
  18. Good to hear you got it working!! Where the gain...

    Good to hear you got it working!! Where the gain control needs to be depends on the sensitivity of the mic, how close you are to the mic, and how loud the source sound may be. If the mic is a...
  19. 01-12-2018
    6
    143

    Hi Tom, You hadn't mentioned where the EQ,...

    Hi Tom,

    You hadn't mentioned where the EQ, Comp, FX, or Pan settings are. If they aren't already, set the EQ and Pan controls at 12 o'clock. Set the Comp and FX at full CCW. If one of the Comp or...
  20. And if the specs are correct 'Preset...

    And if the specs are correct 'Preset Management'.......
    http://www.tc-helicon.com/en/products/perform-vg/specs/
  21. 01-04-2018
    9
    165

    Good to hear you got it!!! I'll be 70 in a few...

    Good to hear you got it!!!

    I'll be 70 in a few short months. Never too old for the 'game' :D
  22. 01-04-2018
    9
    165

    It does stop normal inputs on the Behringer mixer...

    It does stop normal inputs on the Behringer mixer I tried a few moments ago. That switch can be used when bringing USB inputs back into the mixer and monitoring with headphones as well.
  23. 01-04-2018
    9
    165

    Andy, Leave the headphone button 'out'....

    Andy,
    Leave the headphone button 'out'. Assuming you're using Line In 2/3 & 4/5 for the keyboards, turn those level controls to 12 o'clock. Set the Main Mix to 12 o'clock also. I believe with the...
  24. 01-04-2018
    9
    165

    Along with what Craig suggested, there are two...

    Along with what Craig suggested, there are two buttons above the label 'USB/2-Track'. See if either of those are in the 'IN' position and if so give it a push so it's 'OUT'. Those switches can...
  25. 01-02-2018
    7
    313

    Powered my 1202FX USB for about 3 hours. The unit...

    Powered my 1202FX USB for about 3 hours. The unit got warm, but I would not say 'hot'. The ambient room temperature was 16 deg C. I have Fluke temperature reading gun and the area near the RCA jacks...
  26. 01-02-2018
    7
    313

    Hi Nemanja, I'm attaching an image I found that...

    Hi Nemanja,
    I'm attaching an image I found that shows the internals of the 1202FX. I've circled in the image a device known as a 'heatsink'. The function of the heatsink is to carry away heat that...